Annual hot! (Tom's brand) Lighting for glass frosting powder

TBS-302 glass lighting (lamp, light films, etc.) for the frosting powder TBS-302 lighting glass frosting powder is designed for high-grade lighting products tailor-lighting glass, glass shade, slides, and so do the frosting powder can be recycling characteristics. Frosted glass even after lighting smooth and delicate, elegant texture, hazy beauty, high brightness, high yield, the process is simple and easy to operate Frosting stable, frosting speed, not because of the impact Frosting quality temperature and humidity. Frosting can be recycled, environmentally friendly. [Packing] 25Kg / Bag [with Frosting] with acid ratio (by weight): Frosting powder: sulfuric acid: water = 1: 0.25: 0.25 (the concentration of sulfuric acid ≥98%) Frosting powder placed in a plastic container , the first good preparation of sulfuric acid and water was added slowly with stirring in a plastic container, stir and cover. Frosting powder formulated curing for 24 hours before use (the longer the better aging time). Just formulated Frosting thicker, there will be refrigeration phenomenon, to be consistency and temperature return to normal after use. [Frosting Operation] good before frosting with plastic gloves will be watered hydrofluoric acid (HF 1 ratio of water to 6) diluted to clean the glass, the glass clean with a soft cloth (make sure piece of glass are clean - so as not to affect Mongolia After the sand effect) acid wash, rinse the glass with tap water (tap water rinse, put drops of clean water, so the excess water into the Frosting, Frosting affect the efficacy of the liquid). Frosted glass dipped in front of the pool, after the liquid, stir, soak into the glass Frosting 60-90 seconds. Frosted glass has been removed along drop 20-40 seconds to recover Frosting. Remove and rinse the glass with water cannons, rinse dry or drying can be. (When Frosting just started, Mongolian eclipse strong force, after a period of eclipse Mongolia, Frosting time is extended) [wastewater] with lime or quicklime and water and use its PH value to 7-9. The waste water and the resulting precipitate was filtered lime, can be discharged to the residue. [Add add] In order to achieve long-term recovery Frosting old was the purpose of use, use the following method of preparation was concentrated Frosting: to not bring excess cleaning fluid and water Frosting old fluid, add concentrate ratio Frosting: Frosting Powder: sulfuric acid: the old solution (1: 0.2: 0.5) was aged for 24 hours, added to the original old Frosting use. To tap into the excess cleaning fluid and Frosting, destroyed part of the float in the supernatant Frosting added maturation has previously concentrated Frosting. Note: Use every day before going to work out on the bucket hit the supernatant, the precipitate again, the supernatant was removed, the lower for the Blending. [1.0-1.5 PH value] to detect gravity Frosting, Frosting normal at room temperature accounted for 1.36-1.39. [Note] Frosting aging time and ambient temperature curing longer the best results. In Frosting process should wear protective glasses and rubber gloves as Frosting accidentally splashed into the eyes, immediately wash with water.