Asia Exclusive - paint remover

Paint remover instructions for handling a wide range of aluminum mirror back paint protection, with the aluminum mirror desilvering agents for further processing material mirror pattern, text and other processes. Low temperature can also be used for various types of paint drying process. Operation, just covering the surface of the paint liquid paint remover about 1 minute, rinse with water, then clean the glass surface treatment, carved no residue, no edges. Process operation, follow these tips: 1, first you need a plastic adhesive tape engraved pattern after the aluminum mirror attached to the back of the pattern is taken out. The next step: 2, pour the paint remover to deal with parts of the mirror surface paint, still 1-2 minutes after the paint remover and paint on an adequate response (a small amount of office failed to respond, please add into the paint remover Continue reaction), using the rag after the reaction will be fully cleaned paint surface impurities or use tap water (but need to maintain the surface is dry rinse), after removal of surface impurities ready next desilvering process. (Before using paint strippers with a knife draw a circle with not follow the pattern of the paint off separately, the effect is more ideal) Note: 1, before using paint remover shake well before use required; 2, during operation, please take a good anti-acid gloves to avoid touching off a silver paste to the skin or eyes, etc., such as inadvertent contact, immediately rinse with water. If not available place, please call!