Asia exclusive - silver mirror off the silver paint remover

TBS-308 silver mirror off a silver / silver mirror paint remover Operating Instructions desilvering agents dedicated to handling the processing silver mirror, tea mirror, aluminum mirror after mirror pattern is an efficient, new, environmentally friendly silver mirror deep processing of materials. Please follow the following process: 1, first you need a plastic adhesive tape engraved pattern attached to the back of a silver mirror the pattern taken out. The next step: 2, pour the paint remover to deal with parts of the mirror surface paint, still 1-2 minutes after the paint remover and paint on an adequate response (a small amount of office failed to respond, please add into the paint remover Continue reaction), using the rag after the reaction will be fully cleaned paint surface impurities or use tap water (but need to maintain the surface is dry rinse), after removal of surface impurities ready next desilvering process. (Note: Before using paint remover with a knife followed a pattern painted circle with no separate removal of paint, the effect is more ideal) 3, with a brush silver mirror desilvering agents have to remove the paint evenly onto the mirror surface and let stand about 10-20 seconds, rinse with water. Note: 1, paint remover, desilvering agents before use Shake well before use; 2, after stripping and desilvering process using a utility knife to trim pattern edges accordingly. 3, during operation, please take a good anti-acid gloves to avoid touching off a silver paste to the skin or eyes, etc., such as inadvertent contact, immediately rinse with water.