Asian silver mirror off the exclusive launch of the silver paste

Silver mirror off the silver paste instructions off silver paste silver mirror silver mirror glass patterns dedicated to processing, is an efficient, new, environmentally friendly silver mirror deep processing of materials. The process is simple, follow these tips: 1, first you need a plastic adhesive tape engraved pattern attached to the back of a silver mirror the pattern taken out. The next step: 2, pour the paint remover to deal with parts of the mirror surface paint, still 1-2 minutes after the paint remover and paint on an adequate response (a small amount of office failed to respond, please add into the paint remover Continue reaction), using the rag after the reaction will be fully cleaned paint surface impurities or use tap water (but need to maintain the surface is dry rinse), after removal of surface impurities ready next desilvering process. (Note: Before using paint remover with a knife followed a pattern painted circle with no separate removal of paint, the effect is more ideal) 3, with a brush silver mirror off the silver paste evenly on the mirror surface of the paint has been removed, standing about 10-20 seconds, rinse with water. (Note: In the desilvering processing, or directly off the silver paste with screen printing) Note: 1, paint remover, desilvering agents before use Shake well before use; 2, after stripping and desilvering processing uses utility knife to trim pattern edges accordingly. 3, during operation, please take a good anti-acid gloves to avoid touching off a silver paste to the skin or eyes, etc., such as inadvertent contact, immediately rinse with water. Contact: Dr Miss Contact: 13702378374