Supply Heming Technology W-3000 water-based post-weld cleaning agent PCBA

Introduction W3000 for post-weld cleaning PCBA development of a basic water-based cleaning agents to quickly and efficiently removed after welding paste, flux and grease, dust and other residual material. For use in ultrasonic and spray cleaning processes. The product uses our patented technology research and development, clean and strong, smell light, halogen-free, no flash. Gentle formula to make it sensitive metal alloy has good material compatibility, is an ideal environmentally friendly water-based cleaning agent. As electronic products small, lightweight, precision-oriented development, electronics cleaning in the manufacturing sector becomes more and more important with respect to the traditional cleaning agents, W3000 water-based cleaning agent completely eliminates the fire safety problems, to better meet the constantly promotion of environmental protection material grade requirements, comply with the future direction of the cleaning industry. Applications W3000 application of ultrasonic cleaning technology and spray cleaning processes for the removal of solder paste after PCBA welding process, flux residues. . Of oil also have some solubility. Application results are listed below list. Applications: PCBA cleaning water-soluble solder paste residues (welding) ★★★ leave-paste residue (after welding) ★★★ Water soluble flux residues Rosin flux residue ★★★ ★★★ leave-help flux residue oil ★★★ ★★ ★★★: highly recommended, best results; ★★: Recommended; ★: possible; O: not recommended. Advantages? Wash load capacity, it can filter good, with long life, low maintenance costs. ? Can effectively remove tiny gap in the bottom of the Component residue after cleaning pads remain bright. Gentle formula, especially for a longer contact time of cleaning applications. No effect on the PCBA various zero devices, materials compatibility. ? Halogen-free, no flash point, safe, no additional explosion protection. ? No foam, suitable for use in spray cleaning process. ? Free of solid material, was no residue on parts and cleaning equipment, no blush. Physical and chemical parameters of water-based cleaning agent classification W3000 Colorless liquid stratification (standing), the use of milky white. Density (25 ℃) g / cm3 1.00 ± 0.05 PH value (10g / l H2O) 11.0 ± 0.5 Boiling range (℃ / ℉) 100-235 / 212-455 Flash point (℃ / ℉) without washing temperature (℃ / ℉ ) 45-55 / 113-131 halogen wt / wt 0 Solubility in water Soluble Application concentration% 100%