Jiangsu metal stamping parts deburring polishing machine vibration grinding machine

Jiangsu metal stamping parts deburring polishing machine vibration grinding machine features: The world's most advanced tumble flow rotary dish three times the vibration of the principle parts and roll each abrasive grinding. For large quantities of small light ornaments size parts finishing, improve work efficiency 6-10 times. Process does not destroy the parts of the original size and shape, can be automated, unmanned operation, easy to operate, in the course of their work, they can always spot the machining conditions. Vibration barrel finishing has been widely used in various parts deburring, for example round and finishing the processing of a certain proportion of the workpiece, grinding blocks and a liquid medium into a container in a certain shape, in particular when the container lower rates of vibration amplitude and the amount of the workpiece and the grinding block it by a certain trajectory. Movement, due to differences in quality, shape and position of the workpiece and issued grinding blocks, forcing the workpiece grinding blocks collide, roll grinding trace, enabling the workpiece deburring, chamfering and surface finishing. 1. suitable for mass production of light medium and small-sized metal structures and parts of the entire non-metallic materials polisher. 2. Effective deburring parts of the surface, flash, flash, burr, edges, rust, stains, oil stains, scale and pattern marks, so that certain parts of the surface finish, finishing degree and brightness. 3. not destroy the parts of the original shape and position size and geometric precision finishing in the finishing process, can greatly improve the surface roughness of the parts. The operation can be automated, you can always spot the machining conditions surface. 5. The vibration is not used before do not wear black rubber material in the container, while the use of one-time casting molding of high wear-resistant PU plastic material, to improve the life of more than five times the lining, while avoiding collisions with each other between the parts and reduce noise. 6. built with high-performance vibration source of three-phase motors, the amplitude is adjustable from 0.3-8mm. Jiangsu metal stamping parts deburring polishing machine vibration grinding machine can process samples free of charge to customers with product components, in order to determine a reasonable choice of cost-effective abrasive finishing processes (including: equipment selection, selection of auxiliary materials grinding polisher etc.), equipment maintenance and technical support for life.