Inner Mongolia MP SMP nozzle nozzle

SMP nozzle: the overall structure, internal two S-shaped leaves form the largest flow path, and a whole cast of the nozzle body. The benefits of using this type of structure is as follows: In the case of the same traffic, S MP nozzle, which allows the solid particle diameter by higher than normal solid cone nozzle 3 times. Unique design, maximizing avoid the common nozzle under harsh working conditions of clogging problems, especially for spraying large flow of slurry containing particulate impurities more easily transported dirty, lumpy liquid substances, such as lime slurry . Low pressure to 0.2 bar to effective spray. Internal channels are streamlined, so that the liquid through a more smooth, no dead ends, no plug, effectively reducing the liquid atomization pressure. The role of S-shaped guide vanes, spiral spray nozzle to avoid stratification, making more uniform spray comprehensive internal thread or external thread, from 3/8 inch to 4 inches, you can choose the flange connection. Material can be used: brass, 303 stainless steel, 316L stainless steel, Teflon (PTFE) and PP. Spray angle: 30 °, 60 °, 90 ° and 120 °. Traffic from 2.45 L / min to 3400 L / min, and can maximum reach 17000L / min according to user needs.