Supply Heming Technology W-1000 Ultrasonic red plastic cleaners

Description W1000 is a neutral environmentally friendly water-based cleaning agents to quickly and efficiently remove the SMT stencil printing uncured red plastic residues, and residues prior to reflow solder paste, together with ultrasonic cleaning processes can achieve very good The cleaning effect. For 3-5mm SMT screen printing thick plastic and copper red plastic residues, can also meet the cleaning requirements. The product is neutral solution developed by our patented technology, clean and strong, but also has excellent material compatibility, is an ideal environmentally friendly water-based cleaning agent. As electronic products small, lightweight, precision-oriented development, electronics cleaning in the manufacturing sector becomes more and more important with respect to the traditional cleaning agents, W1000 neutral water-based cleaning agent completely eliminates the fire safety problems, more to meet the ever-increasing level of environmental protection material requirements, comply with the future direction of the cleaning industry. Applications W1000 neutral water-based cleaning agent can be used in off-line ultrasonic and spray cleaning processes used to remove SMT stencil printed solder paste residues and red plastic, all types of flux residues have a certain solubility. Specific application results are listed below list. Applications: SMT stencil printing uncured red plastic SMT solder paste printing stencil ★★★ (pre-reflow) SMT solder paste printing stencil ★★★ (pre-reflow) ★★★ misprinted circuit boards soluble flux The residue PCBA ★★ rosin based flux residues PCBA ★ low solids flux residues PCBA ★ ★★★: strongly recommended, best results; ★★: Recommended; ★: possible; O: not recommended. Advantages? Along with the advantages of solvent-based and water-based cleaning agent. ? For cleaning SMT red plastic printing stencils and paste residues, water-based cleaning agent for general cleaning of hard red plastic thick network, it has a special effect. ? Red gum has strong solubility, can shorten cleaning time, reduce cleaning costs, improve the cleaning efficiency. ? Using deionized water as a solvent, no flash point, safe, no additional explosion protection. ? Gentle formula, PH neutral, sensitive metals, stencil, stretching rubber, plastics and other polymer with excellent material compatibility. ? Non-VOC components, to fully meet the requirements of relevant laws and regulations VOC emissions. ? No solid material, there will be deposited on the organic rinsing unit. ? In the cleaning target and the device does not leave a white residue. Physical and chemical parameters of water-based cleaning agent classification W1000 Colorless transparent liquid Density (25 ℃) g / cm3 1.00 ± 0.05 PH value (10g / l H2O) neutral Boiling range (℃ / ℉) 95-250 / 203-482 Flash point (℃ / ℉) without washing temperature (℃ / ℉) 20-40 / 68-104 halogen wt / wt 0 Solubility in water Soluble Application concentration% 100%