Car boot Automotive Relays

Car boot automotive relay performance parameters relay contact form: 1H 1Z Contact voltage drop: Typ: 20mV (10A measured) Max: 250mV (10A measured) Maximum Continuous Current: 60A (23 ℃) (1) (8 ) [url = http: //www.zhuangfdq.com] Automatic Door relay [/ url] Maximum switching current: ON (NO): 150A (2) (8) off (NO): 40A (resistive, 13.5VDC) (8) Maximum switching voltage: See Maximum allowable load range curve minimum load: 1A 6VDC Power Durability: see contact data sheet mechanical durability: 1 × 106 times 300 times / minute Insulation resistance: 100MΩ (500VDC ) Dielectric strength: between contacts: between 500VAC (3) coil and contact: 500VAC (3) Action time: Maximum: 7ms (at rated voltage measurement) (8) Automotive Relay Release Time: maximum: 5ms ( 4) (8) Ambient temperature: -40 ℃ ~ 125 ℃ car relay vibration: 5Hz ~ 22.3Hz 10mm double amplitude (5) (8) 22.3Hz ~ 500Hz 98m / s2 (5) (8) Automotive Relays impact: 294m / s2 (5) (8) Flame Retardant: meet the UL94-HB or better (in accordance with FMVSS [url = http: //www.zhuangfdq.com] car heating control relay [/ url] 302 standard) (6 ) terminations way: package fast connection type (QC): Dust car relay Weight: about 35g car relay mechanical properties: Housing Retention Force: (tensile and compressive) ≥ 200N leads to foot retention: (pull and Pressure) ≥ 100N leads to foot bending force: (each direction) ≥ 10N (7) Preparation of [url = http: //www.zhuangfdq.com] JD1914 automotive relays [/ url] Note: (1) applied to the coils 100% Rated voltage measurement obtained; (2) light load peak surge current, 13.5VDC; (3) 1min, leakage current of less than 1mA; (4) from the rated voltage step to 0VDC, measured without transient suppression circuit and the coil; (5) When energized, normally open contact off time less than 1ms; (6) FMVSS 302: US Federal Motor Vehicle Safety Standards; (7) test point at 2mm distance leads to the foot end, when the removal of the test force [url = http: //www.zhuangfdq.com] radiator relay [/ url], the lead foot deformation should be less than 0.5mm; (8) This parameter applies only to coil [url = http: //www.zhuangfdq.com] Automatic doors relay [/ url] voltage is 12VDC relay specifications. Coil Rated voltage: 12,24VDC operating voltage (Max.): Operating voltage is 65% of the rated voltage of the release voltage (Min.): Release voltage is the rated voltage 10% of rated coil power: 1.6W, 1.7W, 1.9W Car boot Automotive Relays