Wiper Automotive Relays

Automotive relay contact switch relay performance parameters form: 1H 1Z Contact voltage drop: typ: 20mV (10A measured) Max: 250mV (10A measured) Maximum continuous current: 60A (23 ℃) (1) (8) Maximum switching current: ON (NO): 150A (2) (8) off (NO): 40A (resistive, 13.5VDC) (8) Maximum switching voltage: See Maximum allowable load range curve minimum load: 1A [ url = http: //www.zhuangfdq.com] automobile lighting control relay [/ url] 6VDC Power Durability: see contact data sheet mechanical durability: 1 × 106 times 300 times / minute Insulation resistance: 100 [url = http://www.zhuangfdq.com] cold start control relay [/ url] MΩ (500VDC) Dielectric strength: between contacts: between 500VAC (3) coil and contact: 500VAC (3) Action time: Maximum: 7ms (at rated voltage measurement) (8) Automotive Relay Release Time: maximum: 5ms (4) (8) Ambient temperature: -40 ℃ ~ 125 ℃ car relay vibration: 5Hz ~ 22.3Hz 10mm double amplitude (5) (8) 22.3Hz ~ 500Hz 98m / s2 (5) (8) Automotive Relays Shock: 294m / s2 (5) (8) Flame Retardant: meet the UL94-HB or better (in accordance with the requirements of FMVSS 302 standard) (6) terminations way: package fast connection type (QC): Dust car relays weight: [url = http: //www.zhuangfdq.com] electronic locator control relay [/ url] about 35g vehicle mechanical relay Performance: Housing Retention Force: (tensile and compressive) ≥ 200N leads to foot retention: (tensile and compressive) ≥ 100N leads to foot bending force: (each direction) ≥ 10N (7) Notes: (1) applied to the coils 100% Rated voltage measurement obtained; (2) light load peak surge current, 13.5VDC; (3) 1min, leakage current of less than 1mA; (4) from the rated voltage step to 0VDC, measured without transient suppression circuit and the coil; (5) When energized, normally open contact off time less than 1ms; (6) FMVSS 302: US Federal Motor Vehicle Safety Standards; (7) test point at 2mm distance leads to the foot end, when the removal of the test force [url = http: //www.zhuangfdq [url = http: //www.zhuangfdq.com] radiator relay [/url].com] vehicle traction system control relay [/ url], the lead foot deformation should be less than 0.5mm; (8) This parameter is only available in standard coil voltage is 12VDC relay. Coil Rated voltage: 12,24VDC operating voltage (Max.): Operating voltage is 65% of the rated voltage of the release voltage (Min.): Release voltage is the rated voltage 10% of rated coil power: 1.6W, 1.7W, 1.9W Car Switch Relay