Automotive PCB relay

Automotive PCB relay performance parameters of the relay contacts form: 1H 1Z Contact voltage drop: Typ: 20mV (10A measured) Max: 250mV (10A measured) Maximum Continuous Current: 60A (23 ℃) (1) (8) Maximum switching current: ON (NO): 150A (2) (8) off (NO): 40A (resistive, 13.5VDC) (8) Maximum switching voltage: See Maximum allowable load range curve minimum load: 1A 6VDC Power Durability: See contact datasheets mechanical durability: 1 × 106 times 300 times / minute Insulation resistance: 100MΩ (500VDC) Dielectric strength: between contacts: 500VAC (3) between coil and contacts: 500VAC (3 ) Action time: Maximum: 7ms (measured at the rated voltage) (8) Automotive Relay Release Time: maximum: 5ms (4) (8) Ambient temperature: -40 ℃ ~ 125 ℃ car relay vibration: 5Hz ~ 22.3 Hz 10mm double amplitude (5) (8) 22.3Hz ~ 500Hz 98m / s2 (5) (8) Automotive Relays Shock: 294m / s2 (5) (8) Flame Retardant: meet the UL94-HB or better (in accordance with FMVSS 302 standard) (6) terminations way: package fast connection type (QC): Dust car relay Weight: about 35g car relay mechanical properties: Housing Retention Force: (tensile and compressive) ≥ 200N leads to foot Retention: (tensile and compressive) ≥ 100N leads to foot bending force: (each direction) ≥ 10N (7) Notes: (1) measurements obtained when the coil is applied to 100% of rated voltage; (2) light load Peak Surge Current , 13.5VDC; (3) 1min, leakage current of less than 1mA; (4) from the rated voltage step to 0VDC, and the coil without transient suppression circuitry measures; (5) when energized, normally open contact off time is less than 1ms; (6) FMVSS 302: US Federal Motor Vehicle Safety Standards; (7) test point leads to the foot end of the distance at 2mm, after removal of the test force, leads to foot deformation should be less than 0.5mm; (8) This parameter is only applicable in coil voltage is 12VDC relay specifications. Coil Rated voltage: 12,24VDC operating voltage (Max.): Operating voltage is 65% of the rated voltage of the release voltage (Min.): Release voltage is the rated voltage 10% of rated coil power: 1.6W, 1.7W, 1.9W [Insert key seo  car rear window demister relay  words]