Jackpot Factory Direct Taiwan Sen original yellow ink printing ink ABS- ABS-203

Application: for ABS, PS, HIPS and other material Second, the composition: using advanced resin, special pigments and special additives other refined three characteristics: good adhesion, leveling, and easy construction, the film formation smooth, good recoatability. Fourth, the use of the environment: Closed dust, temperature 20 ~ 30 ℃, humidity <85% applied best in five storage methods VI Notes: 1, is coated on the surface grease, dust must be cleaned, moisture drying 2 , openings must be tightly closed after use to avoid moisture or air-dried 3, found in the course or the existence of any abnormality in any doubt, please contact our sales or research and development [Appearance]: [various colors viscous liquid Viscosity]: rotational viscometer test 60000 + 5000mpa.s / 25 ℃ [gravity]: 0.95 + 0.02KG / L / 25 ℃ [Gloss]: gloss meter test 80 + 5% [adhesion]: one hundred grid method 3M adhesive test 100% [thinner]: S-7 [ratio]: 100: 20-40 [Shelf life: sealed and stored at room temperature for 1 year [Painting method: screen printing, pad printing l 1, the substrate processing: Remove with white oil the material oil, in order to avoid the emergence printing oil, poor adhesion anomaly 2, dilute: the ABS ink and S-7 100: mixing ratio of 20 to 40 and stir 3, Printing: Printing from the dry after 24 hours 4 Packing: until the ink is completely dry, no abnormal test only after the printing and packaging and shipment l 1, the substrate treatment: white oil to remove the material oil, in order to avoid the emergence printing oil, poor adhesion anomaly 2, dilute: the ABS ink and S-7 100: mixing ratio of 20 to 40 and stir 3, printing: a, with a solvent to clean utensils after pad printing b, since dry 24 hours after printing 4. Packaging: until the ink is completely dried before packaging and shipping a professional team of engineers to new customer development projects to track the use of engineers on-site proof way to test no abnormality. 2, professional team of engineers to develop new products for customers to implement professional engineers of the proofing mode. 3, the company provides products using the whole phone tracking service mode. 4, the relevant operational staff regularly visit the after-sales services. 5, such as customer during use, such as abnormal, please get in contact with the company, the responsible person will immediately understand the actual situation and make the appropriate solutions based on the actual situation and immediately. To go to the customer site processing, the company will be the first time to arrange relevant personnel to the scene.