TPU vacuum plating primer, TPU vacuum plating paint application

TPU vacuum plating primer, TPU vacuum plating paint applied vacuum plating and electric plating primer paint points finish at the end of two categories, can be used to vacuum plating paint performance characteristics of the TPU, ABS and other materials: strong adhesion, fullness, Construction convenience, in line with EU safety standards. Dip can also be sprayed, it has an excellent film-forming properties and good workability, supporting manufacturing all kinds of electroplating accessories. Vacuum plating paint use: 1, plating materials with special handling agents or cleaning agents thoroughly and oil from the type of surface cleaned (soaked or wipe); 2, operating requirements primer condition ① with vacuum plating primer before operation who used to deal with the main agent, stir to avoid prolonged storage precipitate, affecting fullness and leveling effect; ② primer compounding ratio of 108 vacuum plating primer main agent: 3017 hardener = 100: 15% ③ use 250 mesh gauze filter coating, surface leveling pay attention, do not have shrinkage, pitting, orange peel; ④ painting after standing for 60 minutes can bake in the oven at 80 degrees 240 minutes clean room, so leveling coating fully, and should be consistent throughout the oven temperature; NOTE: If you do not thoroughly dried primer will affect the plating effect, colorful light, loss, anti-white 3, vacuum plating plating operating results; 4 finish?! Operating Requirements conditions: ① deployment vacuum plating finish before the operator used to deal with the main agent, stir to avoid prolonged storage precipitate, affecting adhesion, fullness, leveling effect; ② finish deployment ratio: 203 Vacuum After ④ for 30 minutes; 13% ③ 250 mesh gauze filter spraying, pay attention to surface leveling, fullness, can not have cratering, pitting, orange peel: chrome finish: HB-C hardener = 100 bake oven 80 degrees 60 minutes. NOTE: The operator according to material soft / hardness to determine the proportion finish the main agent and hardener should be used to achieve the best results! Supporting hardener, TPU treatment agent, imitation silver plating (gold) paint