Glass Tempering Furnace Tempering Furnace Tempering Furnace manufacturer supplier Landglass

[] Glass tempering furnace, glass tempering furnace manufacturers, Randy machine glass tempering furnace is provided by Randy machines. Randy Luoyang Glass Machinery Co., Ltd. (www.landglass.com) located in Luoyang City, Henan Luoyang City Road on the 12th king, Contact: Mr. Qin When OP shows "# ### PLC ERROR?", And the values ??are displayed When the show "#####" instead of numerical values ??within the box, this failure is often between the PLC and OP communication caused by the no. 1. Check the adapter and its connection interface (dual OP inspection DP connector); adapter side has two lights are flashing when normal; 2, check the PLC's power supply is normal: Look 24V DC on the cabinet is normal, Please handle the power module failure is not normal according to the circuit diagram. Common reasons are: 1) AC220V power supply is not normal; 2) DC24V line is grounded. 3, check whether the PLC red and yellow light, if there is, please contact with Randy. 2.3 Measures for controlling thermal deformation due to uneven cooling caused by the stress generated in the cooling process is uneven, the cooling rate can be adjusted by adjusting the glass surface air pressure gate. If the glass is bent downward, which can be adjusted by increasing the pressure at the bottom of the grille to improve cooling rate of the surface under glass; if the glass bending upward, through the upper portion of the gate to increase the wind pressure on the glass surface to increase the cooling rate regulation.