LDE hyperboloid bending steel furnace LDAT3 Composite Flat steel furnace steel furnace Landglass

Second, the color of the glass of steel production in the common color glass tea glass, blue glass, green glass and the like. The color of the glass, because the color is deep, heated in the furnace to heat absorbed quickly, the glass temperature rises quickly. Production prove the heating time by 5% to 8%, can be mass-produced good quality color glass. Third, the tempered glass glaze glazed glass layer in the surface of the transparent plate glass frit has a specific color by screen or roller printing, followed by sintering, so that the glaze fused with the glass surface an integrally formed decorative effect is very good glass products. In the sintering, while steel processing can be performed. When the steel, under the same heating conditions, since the glass frit darker color, rapid heat, the temperature will be higher than the temperature of the glaze surface side of the non-glaze, baked quenching, if the temperature of the glass on both sides of the upper and lower non- both, will form an unbalanced stress distribution, the glass is warped, deformed or broken. So the glazed glass and steel, you need to set the upper temperature 2 ~ 3 ℃ slightly lower than the lower temperature can, in ensuring burn through the glass case (in which case there may still be uneven glass temperature), look at the actual production conditions, access to good quality toughened glass glaze by adjusting the vertical height of the cooling air gate. Fourth, steel embossed glass embossed glass, interior decoration mainly used for residential, partitions, bathrooms, doors and windows of the house bottom with translucent instead of transparent shaped features. Embossed glass surface irregularities, generally patterned glass is embossed on one side, when the steel needs to be embossed surface (convex surface) is facing up, smooth side down, and then into the oven heated to avoid the roller surface of quartz damage. Because of the uneven embossing face reflects heat to reduce the absorption increases, the temperature of the glass rises too fast, compared with ordinary white glass, the heating time reduced by approximately 5%, and because of embossed glass thickness non-uniformity ( difference in thickness up to 0.8mm), quenching pressure will be reduced. For example, when embossed glass and steel 5mm thickness, quenching pressure than ordinary flat glass to reduce the 10 ~ 20mmHg. Landglass steel furnaces | [LD-E double-curved bending steel furnace] | tempering furnace provided by Randy machines. Steel furnace, Landglass steel furnace, LD-E double-curved bending steel furnace is Randy Luoyang Glass Machinery Co., Ltd. (www.landglass.com) 2014 has been newly upgraded launched