Steel furnace, steel furnace curved two-way, bi-bending steel furnace, Landglass

[Steel furnace], two-way curved steel furnace, steel furnace Landglass provided by Randy machines. Randy Luoyang Glass Machinery Co., Ltd. (www.landglass.com) located in Luoyang City, Henan Luoyang City Road on the 12th king, Contact: Mr. Qin cleanup order is usually successful roller as follows: 1, with a coarse cloth stove and loading Taiwan's roller. 2. Wipe with a damp cheesecloth stove and a stage of the roller. 3, using gauze wipe roller, roller perception with both hands surface. a. If smooth, then wipe again with a coarse cloth attached to the furnace. b. If not smooth or some fragments visible, start the fourth step. 4, with a minimum of water and non-abrasive pad to wash roller. 5, the use of coarse cloth towel roller and a hand to perceive roller surface. a. If smooth again with coarse cloth after loading into the furnace. b. If roughness or nodules visible, repeat step 6 before starting the steps 4 and 5. 6. If there are still rough and gnarled, with fine sandpaper, filing, or abrasives to remove localized spots. 7, using a damp cloth to wipe the roller or with a minimum amount of water to clean the roller. 8, using gauze wipe roller, and a hand to perceive roller surface. a. If smooth, wipe again with a coarse cloth, and then loaded into a furnace. b. If the remains are still rough or paraganglioma, repeat step 6. c. Once the roller surface is smooth and dry, always wipe again with a coarse cloth roller and then installed into the oven. 1.3 Cooling thermal deformation caused by uneven known that glass is heated to the softening point after being cooled rapidly at the surface of the glass to generate sufficient compressive stress, tensile stress and compressive stress equilibrium process is tempered glass in the interior of the glass, glass and steel when subjected to an external force after the first release of stress, and then produce tensile stress in the glass surface so that the strength of the glass is higher than that of ordinary glass. Tempered glass is glass in the permanent stress, will produce stress in the glass when unbalanced deformation: When compressive stress on the surface is greater than the lower surface tensile stress, in order to balance the stress in the glass is bent downward, and similarly, the current surface compressive stress bending compressive stress than the surface stress in the glass up to the balance, the glass in the cooling process due to both the upper and lower surfaces of the cooling rate is uneven, the cooling speed of the surface stress is greater than the slow cooling surface.