Hebei epoxy grout material manufacturers Hebei epoxy grouting material manufacturers, Hebei epoxy ..

Epoxy grout epoxy grout including A (resin), B (hardener), C (filler) three components, the product is made of high quality resin filler and refined, 100% solids, solvent and other volatile on the body of harmful substances. The material at room temperature in each of three components completely mixed immediately after use, without adding any additional ingredients. The Company epoxy grout to need long-term secondary grouting equipment to withstand vibration, shock and chemical corrosion region, the installation provides a permanent solution, it has been continually proven to greatly extend the operation period and the useful life of equipment moving parts. 1. Product type (1) low temperature (-5-15 ° C) This product is for the cold winter construction specially designed, with low temperature curing, post-high strength characteristics. Even so, it is recommended that the construction of the resin in the winter to warm up, as well as conditional build greenhouses, which can improve the flow of the mixture as well as shorten the time to reach maximum intensity. (2) Normal temperature is good (15-30 ° C) the product overall performance, cost-effective, general-purpose products. Having workers to operate long, flexible, high compressive strength characteristics. (3) high temperature (30 ° C above ambient) This product is for the summer heat during the construction and specially designed. The products in the summer heat, the reaction rate flat, not rapidly gel mixture flowing long enough time, the workers have a longer operating time. Cured flexible, high compressive strength. (4) The type and humidity of the product is specifically designed for high humidity areas, with the wet surface and the water curing characteristics. (5) high-flow type of the product does not contain large particles aggregate, easy, flowing degree, a smaller gap can be epoxy cast, cured flexible, high compressive strength. 2. Uses: For the second filling installation of compressors, pumps, press, grinder, ball mill, high vibration of the device. Susceptible to chemical attack for equipment foundation grouting area. For rail-based, bridge supports and other strong pressure zone grouting. For anchors, reinforced concrete structure planting and building reinforcement. 3. Product features: physical and mechanical properties of compression, and so far superior adhesive cement-based grouting material. Reaction curing mild, low exothermic peak, up to 90 minutes (25 ° C when) the operating time, suitable for large volume use grout. No shrinkage: no shrinkage after grouting molding ensures high accuracy required for installation. Corrosion resistance: long-term contact corrosion with acid, alkali, salt, oil and other chemicals. Excellent creep resistance: This product is available in -80 ° C to + 80 ° C alternately freezing and thawing, pressurized vibration worst case long-term use without plastic deformation, to ensure long-term precision positioning equipment. Remarkable resilience: This product can be transferred from the moving equipment to defuse any possible cement-based grout layer burst dynamic load 4. Product range physical performance test items standard 1 day 3 days 7 days final compressive strength JGJ70-2009> 50Mpa > 65Mpa> 95Mpa> 95Mpa flexural strength GB / T58001-2002> 10MPa> 15Mpa> 20MPa> 50MPa compressive modulus of elasticity of GB / T50081-2002 / / 17.5MPa 18.0MPa))))))))))))) )))))))))))))))))))))))))))))))) Contact: 13930123708 Li Gong QQ: 87954084