Civil engineering, housing construction, earthwork special epoxy pouring glue, crack repair material ..

Pouring glue Instructions I. Features 1. low viscosity, infiltration, can be injected into microfractures 2. 0.2mm wide anti-aging, anti-media (acid, alkali, water) performance 3 not contain volatile solvents toughness and excellent impact resistance 4. not shrink during curing hardened 5.A, B with plastic proportion wider, easy on-site construction 6. contains no volatile solvents, safe non-toxic, easy construction II Scope 1. Concrete Project 2. concrete crack repair internal defects (cellular, loose) dispensing REPAIR 3. tiles hollowing filling three curing time substrate temperature (℃) initial setting time curing curing start time finish time -5 ℃ - 0 ℃ 12 hours 18 hours 240 hours 0 ℃ -10 ℃ 5 hours 12 hours 216 hours 10 ℃ -20 ℃ 3 hours or 10 hours 192 hours 20 ℃ 1 hours 8 hours 168 hours Fourth, the technical parameters Item Technical index detection The results of individual performance assessment colloid tensile strength, mpa ≥20 22.6 A level of tension elastic modulus, mpa 1.5 * 103 1.9 * 103 A level bending strength (MPa) ≥30, and shall not brittle (cracked like) destroyed 45 , not brittle (fracture shape) Class A Class A compressive damage, mpa ≥50 65 A grade adhesive tensile shear strength capacity standard value, mpa ≥10 16.5 A level non-volatile content (solid content) ≥99 99.5 A level Notes: sample preparation ratio: A: B = 100: 15. V, storage 1, the product can be stored at 5 ℃ --40 ℃ below ambient temperature, the shelf life of 24 months. 2, the product according to general chemical transport. Contact: Li Gong 13,930,123,708 Fixed: 0311-69002772