Structural plastic Shijiazhuang, Baoding structural reinforcement materials, civil engineering with anchorage ..

Structural reinforcement material --- anchorage glue instruction manual Features: anchorage rubber is 100% solids, two component, cohesive reactive structural reinforcement material. A and B components of the other store, when used in accordance with Part A: component B = 3: 1 ratio mixed evenly. Which does not affect the use of building space, without changing the structure appearance, joint force uniform, cohesive, high adhesion and shear strength, resistance to aging, excellent fatigue performance characteristics. In the same project, according to the construction customary anchorage glue stick steel glue and having mutually versatility. Range, the unique low temperature (-5 ~~~~ - 10 ℃) under winter conditions curable adhesive, to ensure normal winter construction. 2 Product Use: structural plastic is thixotropic, denser state. Can be used for beams, columns reinforced the "root", after Jiamai pieces of concrete, rock, masonry anchor for the hidden works matrix. Widely used in reinforced concrete ring beam lien, masonry anchor tendons, walls embedded parts, equipment foundation bolts and the like. Three main technical performance indicators: Component A, B two-component recommended ratio (weight) A: B = 3: 1 Operating temperature (℃) -10--55 ℃ operating time (min) 20 ~ 60 Curing time (20 ℃ h) 3 ~ 24 Water resistance (h / shearing Mpa) 1500 /> 14 steel anchor depth 15D (D: bar diameter) of the product of the performance indicators are in line with "reinforced concrete structure design specifications" (GB50367-2006) in A grade plastic requires four process: Positioning → drilling → Khong → steel anchor adhesive formulated rust → → → dispensing anchorage curing curing → test five Instructions: 1. With plastic: now structural plastic The A, B groups were respectively after stir, then follow the A component: component B = 3: 1 (weight ratio), mixing evenly, can be used. 2. anchorage anchor: After the steel surface and the hole Zairu part clean and dry, glue the reinforced Zairu part and in the right amount of glue into the hole, the reinforcement is inserted into the hole to 3. Curing: The product Suitable for construction environment below 60 ℃, the initial setting time of 2 to 6 hours at room temperature. Day fully cured at room temperature, can be at negative temperature, humid environment cure that takes a little longer. Six construction points: 1. hole must be clean, there is water or dust will affect anchoring quality. 2. Determine the rational anchoring parameters, such as hole diameter, depth. 3. Not fully cured before the ban hit moving bars. 4. Do not use the anchorage before the glue A, B material mixing, immediately after mixing into the hole. Seven Note: 1. At lower temperatures, to A, B component at 60-80 ℃ warm water pot (bpd) in the temperature of, to reduce its viscosity. 2. A, B component were used to obtain container, first take the A Group 3 parts into the prepared container, and then take part into the group B 1, and mix well. Eight Packing & Storage: 1. The product packaging specifications: two-component (15 kg +5 kg / group or 30 kg +10 kg / set) 2. This product is sealed and stored in a cool, dry and ventilated environment, life 2 years. Nine Special Statement: The company's products is 100% solids modified epoxy resin and hardener supporting the production processing, no pungent smell, pure green, pollution-free. Thixotropic high degree, determined not to sag. And can be customized to different requirements of the appropriate adhesive anchorage of other varieties. ************************************************** ***************************************** Contact: Li Gong 13930123708 Online QQ: 87954084