Plastic Melt Index Tester

Product Description First, the plastic melt index detector Product Description plastic melt index values ??the melt flow rate MFR apparatus used to measure a variety of polymers at the viscous flow state, applicable both to the higher melting temperature polycarbonate, polyarylate sulfone, fluorine plastic, nylon and other engineering plastics, are also applicable to melt the polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC) resin or the like low temperature plastic test, widely used in plastics production, plastics, petroleum and chemical industries as well as relevant institutions, research institutes and inspection department. This instrument is suitable for "GB / T3682-2000 thermoplastic melt flow rate and melt volume flow rate measurement" national standard measurement thermoplastic melt flow rate of the provisions of this standard is equivalent to using the ISO 1133: 1997 provisions. Subject to desktop structure, design reasonable stable and reliable performance, beautiful appearance, convenient operation, using high-performance, high-precision control instruments with high sampling accuracy, control the rate and fast, using a mold burnt the PID algorithm temperature control. Plastic melt index detector Specifications Model: BE-MY-8100 has the following characteristics: 1, heating speed, small overshoot 2, high temperature accuracy 3, after filling, can be restored quickly heated state 4, can be manual, Automatic Test Method 5, test parameters and calibration correction convenience 6, the local leader in the domestic level two, the plastic melt index detector main technical parameters 1, the extruded material portion of the discharge port diameter: Φ2.095 ± 0.005 毫米 discharge Port Length: 8.000 ± 0.025 毫米 loading cartridge diameter: Φ9.550 ± 0.025 毫米 loading cartridge length: 152 ± 0.1 毫米 piston head diameter: 9.475 ± 0.015 毫米 piston head length: 6.350 ± 0.100 mm2, standard test load (Total 8) 3. Temperature range: --400 ℃ 4, temperature accuracy: ± 0.5 ℃ 5, the display resolution: 0.1 ℃ 6, the temperature recovery time: less than 4 minutes 7, cut material: can be manually or automatic cut material 8, thermostatic time: ten thousand continuous hours of work 09, Dimensions: width × thickness × height = 250 × 350 × 510 10, power supply voltage: AC220V ± 10% 50HZ 11. Other accessories: a blade, installed hopper 1, a cleaning rod, feeding a mandrel, die for cleaning rods 1, Level 1, mirrors one. !