The melt flow rate meter

The melt flow rate instrument I. Introduction for the determination of various polymer melt flow rate MFR value when the viscous flow state, applicable both to the higher melting temperature polycarbonate, poly aromatic sulfone, fluorine plastic, nylon and other engineering plastics, are also suitable for polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC) resin, a low melting temperature plastic test widely used in plastics production, plastics, petroleum and chemical industries as well as relevant institutions, research institutes, and commodity inspection departments. This instrument is suitable for "GB / T3682-2000 thermoplastic melt flow rate and melt volume flow rate measurement" national standard measurement thermoplastic melt flow rate of the provisions of this standard is equivalent to using the ISO 1133: 1997 provisions. Subject to desktop structure, design reasonable stable and reliable performance, beautiful appearance, convenient operation, using high-performance, high-precision control instruments with high sampling accuracy, control the rate and fast, using a mold burnt the PID algorithm temperature control. Specifications Model: KL-XNR-400AM has the following characteristics: 1, heating speed, small overshoot 2, high temperature accuracy 3, after filling, can be restored quickly heated state 4, can be manual, automatic test method 5, The test parameter calibration and correction convenience 6, equipped with a printer 7, the machine in the domestic leading level Second, the main technical parameters 1, the extruded material portion of the discharge port diameter: Φ2.095 ± 0.005 毫米 spout length: 8.000 ± 0.025 mm mounted cylinder diameter: Φ9.550 ± 0.025 毫米 loading cartridge length: 152 ± 0.1 毫米 piston head diameter: 9.475 ± 0.015 毫米 piston head length: 6.350 ± 0.100 mm2, standard test load (of 8) 3. Temperature range: --400 ℃ 4, temperature accuracy: ± 0.5 ℃ 5, the display resolution: 0.1 ℃ 6, temperature recovery time: less than 4 minutes 7, cut material: can be manually or automatically cut material 8, Thermostat time: 9 hours of continuous work ten thousand, automatic printout 10, Dimensions: width × thickness × height = 250 × 350 × 510 11, power supply voltage: AC220V ± 10% 50HZ Dongguan, Shenzhen, Guangzhou, Foshan, Zhongshan, Guangzhou, Xiamen, Fujian, Jiangsu and Zhejiang Shanghai, Suzhou, Hangzhou, Wenzhou, Taizhou, Ningbo has a melt flow rate instrument production | melt index testing equipment and instruments | melt index tester | plastic melt flow rate tester, melt flow rate tester Price Introductory description