Chengdu spectrum belt grinding prototype (stainless steel) MY-1

Host Introduction: spectrum belt grinding prototype (stainless steel) MY-1 Details: Product Name: MY-1 prototype spectrometer belt grinding Product description: MY-1 prototype spectrometer belt grinding the specimen sample preparation process, test like polished before the spectral measurement indispensable important step. MY-1 prototype spectrometer is fully enclosed belt grinding of stainless steel abrasive belt machine. There is a water tank under the belt, the mill kind of process, the dirt taken off the water, so that the work does not have dirt in the air. MY-1 prototype spectrometer belt grinding is by multi-party market research and collecting many cases, the length of each collection and the development of new product development. MY-1 prototype spectrometer belt grinding works. Installation on a large drum with rubber spindle motor, drive belt driven by a small drum connected in the motor driven belt in a straight line, the wear on the belt-like grinding the sample can be carried out in order to meet Spectral measurements of the sample requirements. The main parameters: roller center distance: 310mm belt width: 100mm Length: 920mm Speed: 1400r / min 480 m / min Motor: Y801-4,0.55KW, 380V, 50Hz Dimensions: 470 × 480 × 230mm Weight: 55Kg