CMW280CMW280 Mobile Phone Tester

CMW280 CMW280 Mobile Phone Tester Jiang 13510075288 Company Name: Shenzhen Electronic Technology Co., Ltd. Instrument Shenzhen Jia Huatai Electronic Technology Co., Ltd. Contact: Tan Yanfei (General Manager) - Li Miss (special assistant) Mobile: Tan S 135-1007- 5188 Technical Advisory: Jiang work 135-1007-5288 Tel: 0755-21502766 Fax: 0755-21502722 Customer Service QQ: 53540923 Taobao shop: http: //tosstar.taobao.com Website: http: //www.yqybshop.com http: //www.yixin1718.com mail: yixin1718@126.com Address: Longhua District Department of Chinese Pine Road, Tin Building A 408 CMW280 detailed instructions for IEEE 802.16e WiMAX mobile station test in-one solution for R & S CMW280? is according to the IEEE 802.16e standard and the WiMAX Forum framework, fast and accurate testing of WiMAX equipment in-one solution. R & S? CMW280 WiMAX communication tester for high-speed RF calibration in production of non-signaling mode and mobile devices under simulated network conditions to test the base analog signaling mode together. ? ◆ support all WiMAX frequency bands of continuous frequency range up to 6GHz? ◆ real-time signaling WiMAX CPE can be tested under simulated conditions the network? ◆ Vector Signal Analyzer (VSA) can be used to verify transmitter? ◆ vector signal generator ( VSG) can achieve a variety of receiver test:?? for short set-up time of ARB mode or complex signals in real-time mode of large amounts of data ◆ top nonsignaling calibration method of R & S Smart Alignment and R & S Multi-Evaluation? technology dramatically reduces test time ◆ can be easily integrated with WiMAX devices are connected through RF interface Features 1) high test reliability:? mobile device testing not only verify and record the RF parameters in full-signaling mode, and verify and record the MAC layer protocol packets. Test the signal quality far exceeds the signal quality gold machine program. 2) reduce the cost of test:? RF calibration maximum speed parallel testing method is nearly 10 times the transmitter and receiver and the simultaneous measurement of R & S Smart Alignment technology thoroughly testing time is reduced 3) increase productivity, simplify test configuration with very low uncertainty and high reproducibility. Since the RF input and output dynamic range is wide, and has a switching function with integrated RF front-end, and therefore the need for external devices in the test configuration. 4) ready to meet future WiMAX MIMO measurement requirements apply to the second way in the measurement path. 70 MHz to 6 GHz RF frequency range of continuous, 40/70 MHz IF bandwidth of 5) versatile R & S? CMW280 for universal basic unit has a continuous wave (CW) RF signal source test applications and RF power meter. For remote control via LAN, USB 2.0, or IEC / IEEE bus.