Shenzhen used Rohde & SchwarzFSIQ77G vector signal analyzer spectrum analyzer Lo ..

Rohde & Schwarz FSIQ7 7G Vector Signal Analyzer / Spectrum Analyzer | Rohde & Schwarz | 20Hz to 7GHz Brand: Germany Rohde & Schwarz (ROHDE / SCHWARZ) FSIQ to a single computer to achieve full time domain and frequency domain modulation domain measurements, and the operation is simple and easy to use. FSIQ3: 20Hz - 3.5GHz FSIQ7: 20Hz -7GHz FSIQ26: 20Hz -26GHz FSIQ40: 20Hz -40GHz * Spectrum Analyzer - a very wide dynamic range for ACPR measurements difficult: NF = 15dB rather TOI = +20 dBm; so the quality factor the NF-NOI = + 5dBm - suitable for W-CDMA (4.096MHz integration bandwidth) measured 75dB ACPR dynamic range -82dB ACPR dynamic range (4.096MHz integration bandwidth). But separated by a channel 2.2GHz require less total measurement error <1dB, 7GHz the following <1.5dB - RBW 1Hz - 10MHz, with 1/2/3/5 times step - highly selective 5-pole resolution filter - suitable for rapid measurement resolution bandwidth (RBW) of 1Hz to 1kHz of FFT filter - shows the average background noise power is -150dBm / 10Hz bandwidth (typ.) * Vector Signal Analysis - Instrument built for vector signal analyzer digital and analog modulation signal for a general analysis, specific support including BPSK modulation scheme to 16QAM / (G) MSK / AM / FM / PM - vector signal analyzer for W-CDMA systems - sampling rate of up to 6.4 trillion symbols / s * general signal analysis functions - speed synthesizer FULL SPAN (full span) mode scanning time 5ms only (FSIQ3 / 7) - Fast time-domain analysis in ZEROSPAN under (zero span) mode scanning time is only 1ms - with arbitrary waveform signal in high accuracy and repeatable measurements True RMS detector - a high display refresh rate per second refresh 25 times - with a large high-resolution color display (24 cm /9.5 inch TFT)