LPK type solderability tester

LPK type solderability tester Supply imported from Germany LPK type solderability tester German DIN 32506 / DIN40046 solderability tester LPK type solderability tester - for lead-free solder, the device is based on DIN 32506, DIN 40046 and DIN IEC 68 as the reference standard used to test the metal of solderability test program is a lift infiltration test. sample at a constant speed vertically immersed in the solder bath. if necessary to keep it at a certain time in a tin bath, and then .. at the same speed it is withdrawn measurements infiltration area and / or wetting time depends on the size of the progress by other invasive mode can be more intuitive to judge the quality characteristics: 1. Sample can 0 至 45 mm / s velocity withdrawn 2. infiltration time from 0 seconds to 10 seconds by a quartz-controlled, can be opened Off 3. potentiometer is used to adjust the speed of the solder bath immersion and immersion time. These two values ??are displayed on the LCD 4. The solder bath temperature via a PID controller is set within a range from room temperature to 450 ℃. control device operating voltage 230VAC50HZ + / -10%. require other range 5. Test equipment including TO5 or TO6 solder bath immersion lift and control unit Equipment Solder bath T05 / internal dimensions:. 86 mm long, 68/20 mm wide, 90 mm deep tin content: 2850 g 6. Solder bath T06 / internal dimensions 7.120 mm long, 80 mm wide, 60 mm deep tin content: 4800 g. liter leaching unit and the control device has a plug-in connection solder bath 8.Parts 9. elevator dip solder bath unit 10. (T 05 or T 06) Control device control apparatus according to the thermocouple 12. The self-optimizing temperature mold burnt Controller welding http://www.wuma-sh.com/wmdz11-Products-19354929/