US RPS-202TL solderability tester

US RPS-202TL solderability tester I. solderability test bench RPS-202-TL main features are described RPS-202-TL is a microprocessor-controlled solderability test system, speed and accuracy are in line MIL- .. STD-202 Method 208 / MIL-STD-2000 standard for all program parameters are set digitally microprocessor capable of storing eight different programs for automatic operation These include: flux and solder immersion and raised speed, solder flux immersion residence time, number of cycles required and welding temperature .RPS-202-TL also comes with a calibration depth caliper, flux and solder furnace can be adjusted accurately to 0.001 inches in continuous applications, all functions It is set to automatic processing, and send precise repeatability system set flux furnace, static and automatic soldering furnace skimmer as a whole. The front panel controls can enter all the large digital display for security and convenience using the microprocessor control system is fully interlocked with .RPS-202-TL can automatically adjust the speed of the vertical axis to separate MIL-Spec (1 inches / sec) or all of the optional rate (0.5-2.5 inches / sec). fluxing Step out of operation with programmable "; just welding."; Step A manual setting can be easily controlled turret (toolhead) mobile system is also equipped with direct access to the thermocouple output column for the real-time reading, this output column can be used as a chart recorder (Model ST-CR), calibrated thermocouple or any use "; J";. thermocouple SPC device user IBM-compatible computer, an optional RS232 communication port is used for system control and / or monitor calibration temperature controller has a programmable probe calibration synchronization to compensate disorders. vertical speed by a plug-in port next to the instrument calibration temperature parameters set by the user, including the tolerance set value (+) or ( -) If the soldering temperature is out of range, the instrument will stop working, thus reducing the possibility of operator error is the standard alarm clock This feature ensures correct welding temperature solder furnace: furnace is a special solder alloy. made of stainless steel, with no pollution and durability. This is the only material in contact with the solder, it has alloy stability. proportional temperature control soldering temperature can be set within a specific range of ± 3 ℃. solder solder furnace capacity This is six pounds ultrapure SN63 solder furnace by management, and has been tested at the factory 8 hours when using the solder furnace placed directly in the RPS-202-TL body outer security:... RPS-202-TL Configuring an alarm: turret clogged cycle is complete, the system's internal error and welding overtemperature emergency stop buttons are located on the control panel system UL UL equivalent devices and wiring In addition, all program parameters consists of a three layers. password protection system, three separate password (each system has a range of password) Second weldability test bench RPS-202-TL configuration table host 1 optional RS232 communication port;. high strength support frame; press user requirements fixture request two technical performance description of the operation: 8 different storage procedures precision: X axis ± .010 inches Y axis ± .002 inch capacity: more - typically a one-time capacity of more than 45 axial and more than 21 radial devices immersion depth: adjustable control, flux and solder into depth input / output speed: 0.5 inches to 2.5 inches / sec immersion time: 0.1 seconds to 10 seconds solder furnace temperature control feature: a large proportion (0 -350 ℃) ± 3 ℃ PID used furnace surface area: Static 2 inches × 4 inches, automatic skimmer with solder capacity: 6 pounds available depth: 2 inches RPS 202-TL Basic Operation Power input: 120 / VAC / 1PH / 60HZ / 10Amperes (switchable 220VAC) Controller: Microprocessor physical parameters: structure: heavy-specification steel, desktop mount with multiple squaring machine for all components are epoxy-coated . Size: 24 inches (width) × 16 inches (height) × 20 inches (depth) Transport Net Weight: 85 pounds http://www.wuma-sh.com/wmdz11-ParentList-1083786/