Supplying Woodworking A + type of white latex water factory in Wuxi

Profile: A + type white latex is made of poly vinyl acetate emulsion polymer compound made of high-quality adhesive. Easy to use, high bonding strength, time fast, low-temperature deposition of the fine, transparent film, and has excellent water resistance, non-toxic pollution, a new generation of environmentally friendly adhesive. Mainly used for wood and cloth folder adhesion, wooden frames do finger to use, solid wood furniture, senior furniture, use: wooden frames used in processing is the best white latex, wood crafts, and other aspects of the fight boards, finger, veneer and so on. More can be used for office furniture, after forming. Paste ordinary wood frame splicing, veneer, stickers, also for pressing plywood, fiberboard and plywood fire board paste, craft jewelry boxes, tobacco and luxury gift box production, craft frame green water-based adhesive; shade regard, cloth and cloth, nylon cloth, polyester fabrics, rich silk and so on. Second, the technical indicators: 1, Appearance milky viscous glue PH value of 5.05-7.0 Solid content ≥45% Viscosity (25 ℃) 25000-30000MPC.S residual monomer ≤0.3% 2, adapt to temperature: above 5 ℃ 3, curing time (25 ℃) 20-30 minutes 4, wood failure rate: 95% 5, the compression shear strength: 15mpa / 72h 6, this product meets the GB / 8583-2001 standard three-bonding process: 1, the adherend (timber) of adhesive surface should be smooth, no bending, no dust, wood humidity should be controlled within 15%. 2, single-sided adhesive, with both joining, coating must be uniform, not partial lack of glue, pressure (pressure) is generally 8kg / cm, the pressing time is usually at least 2-3 hours. The above steps must be closely controlled, otherwise affect the bonding effect. Fourth, the storage period: 5 ℃ -37 ℃, sealed and stored for 12 months. Warning: The information we provide is based on our current knowledge and experience, the use of the adhesive because the user is beyond our control, we can not absolve the user own responsibility for testing and experimentation. We only adhesive product is responsible for the technical parameters and performance, rather than to determine the suitability bear legal commitment for any particular purpose