Specializing in research and production of white latex

I. Introduction: This product is polymer modified with acrylic resin, the application of advanced science and technology preparation. Easy to use, high bonding strength, fast drying time, excellent low temperature into a mold, and has excellent water resistance, non-toxic pollution, a new generation of environmentally friendly adhesive. Imported raw materials production, mainly used to make wooden frames with finger, solid wood furniture, senior furniture, use: used in the wooden frame processing is the best white latex, wood crafts and other aspects of the puzzle, finger, veneer and so on. More can be used for office furniture, after forming. Paste ordinary wood frame splicing, veneer, stickers, also for pressing plywood, fiberboard and plywood fire board paste, craft jewelry boxes, tobacco and luxury gift box production, craft frame green water-based adhesive; shade regard, cloth and cloth, nylon cloth, polyester fabrics, rich silk and so on. Second, the technical indicators: 1, Appearance milky viscous glue PH value 5-7 Solid content ≥50% Viscosity (25 ℃) 425000-50000MPC.S residual monomer ≤0.3% 2, adapt to temperature: above 5 ℃ 3, curing time (25 ℃) 20-30 minutes 4, wood failure rate: 95% 5, the compression shear strength: 15mpa / 72h 6, this product meets the GB / 8583-2001 standard three-bonding process: 1, the adherend (timber) of adhesive surface should be smooth, no bending, no dust, wood humidity should be controlled within 15%. 2, single-sided adhesive, with both joining, coating must be uniform, not partial lack of glue, pressure (pressure) is generally 8kg / cm, the pressing time is usually 60-90 minutes. The above steps must be closely controlled, otherwise affect the bonding effect. Fourth, the storage period: 5 ℃ -37 ℃, sealed and stored for 6 months.