High viscosity white latex manufacturers

Long billion glue factory specializing in the production of white latex wholesale I. Introduction: This product is polymer modified with acrylic resin, the application of advanced science and technology preparation. Easy to use, high bonding strength, fast drying time, excellent low temperature into a mold, and has excellent water resistance, non-toxic pollution, a new generation of environmentally friendly adhesive. Imported raw materials production, mainly for solid wood furniture, senior furniture, wood crafts and other aspects of the puzzle, finger, veneer and so on. More can be used for office furniture, after forming. Second, the technical indicators: 1, Appearance, milky viscous glue, PH value 6, -7.0, curing content ≥55%, viscosity (25 ℃) 100000-80000MPC.S. Residual monomer ≤0.2%. 2. Temperature: above 5 ℃. 3, the curing time (25 ℃) 20-30 minutes. 4, wood failure rate: 95%. 5, the compression shear strength:. 15mpa / 72h 6, this product meets the GB / 8583-2001 standards. Third, the bonding process: 1, the adherend (timber) of adhesive surface should be smooth, no bending, no dust, wood humidity should be controlled within 15%. 2, single-sided adhesive, with both joining, coating must be uniform, not partial lack of glue, pressure (pressure) is generally 8kg / cm, the pressing time is usually 60-90 minutes. The above steps must be closely controlled, otherwise affect the bonding effect. Fourth, the storage period: 5 ℃ -37 ℃, sealed and stored for eight months.