Viscosity curved glue manufacturer

1. Product Description This latex is a thermal-type water-based polyvinyl acetate adhesive whole agent, is a one-component latex. This latex can conform to German DINEN204 D3 waterproof standard. II. Scope 1. Firewood curved cabinet doors edge, curved plywood 2. Order of veneer. edging decorative paper veneer hot and cold pressure. III. Features 1. One component glue, without the gel ,, waterproof grade D3 2. cold thermal bonding are apply heat for better adhesion strength 3. high solid content, high bonding strength four bonding technology parameters 1. solids content:... 50 ± 2% 2. PH value: 3-3.5 3. Viscosity ( 20 ℃) ??20000-25000CPS 4. matrix: PVA emulsion 5. Toxicity: Non-toxic 6. Color: white 7. The minimum film humidity:. 10 ℃ five A method for bonding a substrate coating should be dust-free. . grease, and after constant temperature and humidity processing 2. Do not mix with other glue 3. The substrate generally do not use the moisture content below 10 ℃: 10-16% 5. glue quantity: 100-160 g / m 6. open plastic Time: humidity 25 ℃, humidity of 55%, adhesive capacity of 120 g / m, 4-6 minutes, for extension of time may increase the amount of glue 7. When pressure:. 4-9kg / c㎡ 8. Pressing time: cold veneer (about 25 ℃), 40 minutes, and hot veneer (85 ℃), 90 seconds, and pressing time with glue fabric volume and coverage on material properties and thickness varies 9. sticky. Good wood combined maximum bonding strength up to seven days. VI. during storage 20 ℃, can be stored in a sealed container for six months.