Supply E-07 epoxy resin AB glue

The agent name E-07A (flat soft) Viscosity 7000-7500CPS gravity 1.12 appearance transparency hardener name E-07B (flat soft) Viscosity 400-500CPS transparent appearance with the proportion of 0.8 to 3 to 1 (weight ratio) main purpose for in badge, handicrafts, electronic components and other surface perfusion, drape main specialty elastomers, gloss, anti-foaming excellent, good transparency can be used time 100g × 25 ℃ 50 分钟 initial hardening time of 13 hours (50 ℃ × 4 小时60 ℃ × 2 hours) and then the strength properties of cured 60 (kg / cm 2) 90 Bending strength (kg / cm 2) Fold deflection without breaking heat distortion temperature of 78 ℃ hardness (SHORED) 28--36 electrical characteristics of the surface impedance 1 × 1015 (Ω / cm2) volume impedance 5 × 1015 (Ω / cm2) above the dielectric constant of 4.7 breakdown voltage 22kv (kv / mm2) Note: E-07AB plane soft at room temperature below 25 ℃ when curing time will be extended, If you want to shorten the curing time must be baked to a temperature of 40-60 ℃ 4-5 hours. At the same time, E-07AB plane soft after mixing will produce about 58 ℃ temperature, make fair use.