Supply E-05 epoxy resin AB glue

The agent name E-05A appearance transparent transparent viscosity liquid material 5000-8000cps hardener name E-05B 5000-6500cps viscosity liquid material with the appearance of brown 1 to 1 ratio (weight ratio) The main purpose Then, repair, perfusion main specialty high strength, impact resistance, toughness rich Can use the time to 100g × 25 ℃ 25 分钟 initial hardening time of 4 hours 298-330 cured characteristic compressive strength (kg / cm 2) followed by the strength of 98 (kg / cm 2) bending strength 110 (kg / cm 2 ) Heat resistance 81 ℃ Hardness 82 (SHORED) First, use: 1. They were taken 1 and B agent mixed 1 part A and stir well. 2. The AB mixture coated adhesive surface. 3. Adhesive coated plastic items should be banned shift or move at least 240 minutes, otherwise it will seriously affect the bonding effect. 4. Adhesive coated plastic items should be in order to work at least 20 hours, otherwise the adhesive curing effect and life will be affected. Second, pay attention: 1. A, B two must be stored in a cool place, two can not simultaneously be stacked. 2. A, B two, such as a large number of mixed, will quickly cure dangerous, should be particularly careful. 5. After use, such as skin buildup of the agent, should be washed with soap. 6. Coating tool or container can not be mixed, so as not to shorten the life of this agent. Note: The packaging for each of the gross weight 2kg, each box of 10 pairs of the A and B adhesive glue a 1: 1 ratio and stir evenly after use, the deployment of the glue must be used within 20 minutes, to avoid wastage, understand the Department welcomed the inquiry ... Thank you!