UV glue UV groups of plastic glass glass UV shadowless adhesive curing adhesive

Applications: The product is 200 ~ 400nm wavelength ultraviolet radiation for curing UV curable glue. For bonding glass and glass. Often used in glass products, glass dining table, glass coffee table, art glass, bathroom glass, glass and other glass products industry showcase. Features: 1. UV groups of plastic glass stick genus flexibility enhancing formula that large areas of glass when the adhesive layer is not white, can not afford color pattern or white stripes. 2. good aging resistance under conditions of long-term stress can still maintain a high intensity and strength does not decay. 3. UV glue obvious than greater transparency, long-term product after curing the same yellow, not albino. The environmental non-toxic, low odor, low corrosion. Usage: 1. Clean the glass surface of the work, clean water or detergent residue on the glass surface is dry, you need to wait for it to dry or dry or completely dry before dispensing. 2. glue even point (down) in which a glass surface. And secure the position of the other piece of glass glass light up in place of bonding glue, squeeze a glass bubble leveling discharge and glue, glue the sticker after covering parts of both. 3. Use a cloth or paper towel over the glass surrounding the overflow plastic erased. Prior to this step as much as possible, do not let the glue ultraviolet radiation exposure. Before fully cured glue to scrub the glass surrounding the excess glue do not use (a solvent such as a glass of water, water, alcohol, acetone, etc.) a damp, wet paper, liquid. The wavelength of 365 nm ultraviolet light irradiation until the layer has fully cured. When irradiated with ultraviolet light as close as possible to accelerate the curing speed glue. 5. The ultraviolet radiation cured. Surrounding the glass is still excess plastic blade to scrape. Note: 1. When the desired layer thickness of the adhesive 0.01-0.05mm, too thin or too thick will be affected to the adhesive properties. 2. Make sure the layer absorbs UV energy sufficient to achieve the best curing effect, or likely to affect the adhesive properties of adhesive. 3. When ultraviolet radiation Do not move back and forth in the glass, or likely to cause white glue and adhesive strength. The remaining glue can not fall back to the original packaging, should be stored in the dark sealed room, Do not allow contact with children. Packaging and Storage: Store in the dark, enclosed, ventilated, cool conditions. Packing: 250ml / bottle 1kg / bottle