Curved glass tempering furnace _ _ two-way glass tempering furnace continuous glass tempering furnace _ Landglass

[Glass tempering furnace], curved two-way glass and steel furnaces, glass tempering furnace Landglass provided by Randy machines. Randy Luoyang Glass Machinery Co., Ltd. (www.landglass.com) is located in the 12th Luoyang City, Henan Luoyang King City Road, Contact: life is largely dependent on the situation described above, Mr. Qin roller track. Analyzing roller during normal use, to ensure that the roller surface is intact. A rough surface will greatly influence the roller to the contact surface of the glass with a roller, but also may cause defects. Some roller small surface pits may not lead roller scrapped, but pits some of the general area has a larger surface area it is most likely deposited. Projection roller surface is cleaned roller or stop using one of the reasons, because this defect certainly leave marks on the glass. Another possible cause is the cause of roller scrap steel sleeve portion damage or loose sleeve. In order to avoid this possible loose set, it must ensure that the steel roller sleeve part can not be due to a bad thermal insulation material, or open stove in case of leaving the high furnace steel jacket portion exposed to high radiant heat being. Roller deformed or not circular but also a cause of eccentric roller scrapped. If it is determined round roller beating too high, we recommend that you contact the roller manufacturer. 2.1 for heating roller deformation countermeasures in the front glass and steel rollers allow enough time to warm up, so that the roller is heated evenly, eliminate stress, reduce stress and deformation of the roller. For roller wear, be polished at midnight to clean up the entire roll roller, try to avoid sanding roller part, the roller wear uniform, maintaining the consistency of the roll. And always check to adjust the height of the roller, the roller tracks on the running surface is a plane, in order to maintain the smooth glass surface. Roller grille structure is wrapped around the metal roller surface nylon rope as insulation materials, glass grille in burst easily cut the nylon rope, causing the roller surface uneven, to promptly repair, replace nylon rope.