Supply PVI inorganic coating decorative board

Product Name fireproof inorganic precoated plate Dimensions 1200 * 2400 * 6-20mm / 1220 * 2440 * 6-20mm Usage Building decorative plate clean plate company's main products, imitation marble granite stone, imitation wood decorative series, porcelain personalized series, fluorocarbon cladding panels, water siding, imitation marble granite stone, insulation integrated series, high wear resistance imitation stone series inorganic pre-coated plates, marble plates, decorative wood panels, colorful painted plate, concrete water siding , insulation decorative panels, mounting plates pre-coated inorganic ceramic plate a total of five, there are stick-thin, clear box layering style, trim the adhesive, dry hanging, hidden frame layering style. First, pay attention to the construction site when the underlying confirm stick-construction and cleaning the bottom to fully dry, so that the bottom level, to remove garbage and dirt surface layer is preferable to use calcium silicate board or fire board. Secondly, according to the decorative board size, shape of the bottom of the crossed positioning. Third, at a given position on the double-sided adhesive tape, hard pressed to make cement, generally used in an amount of: wall about 3.3m / m2, the ceiling is generally used in an amount of 4.33.3m / m2. Fourth, we must cut off plastic water bottles hose least, leaving the cigarette thickness (approx 7mm), the width of the outlet, then extruded glue, in a predetermined position (tape next to) the church painted wire bonding, general use amount: on the wall about 0.5 / m2, the ceiling was about 0.6 / m2 Fifth, we should pay attention to the double-sided tape for peeling and removing the release paper to be careful safety. Sixth, after the decorative sheet is coated with an adhesive bonding glue adhesive decorative plate within 10 minutes at the desired paste location. The position of the hand to suppress the tape, so that sufficient adhesion, but the construction should be careful not to be able to move or re-bonding grace. General maintenance hours of the day, during the bonding glue to harden for maintenance. Inorganic pre-coated sheet plate processing may generally be pneumatic or electric tools for milling holes, cutting and other processing, cutting props appropriate fine-toothed type or non-tooth. Drill mill plate can be dedicated drilling grooving, chamfering, etc. Plate all due process was exposed plate base can be closed with a sealer treatment. But in the process should pay attention to the processing method can be used when cutting stone saws, when electric cutting machine (saw stone used) cut in the surface of the back plate with a knife back and forth NT pull a few, will be broken decorative facing outward, fracture surface and then polished. In drilling, when opening, hit a small hole, the available drill, wearing wires, tubes with holes opening directly by opening, or hit around the hole, then sawed out.