Factory direct sales of silicone slip cloth Disu, supply silicone coating

Factory direct sales of silicone slip cloth Disu, supply silicone coating Description: Model: Hong wind HF-8509 Certification: This product complies with ROHS and other environmental requirements by the US FDA and the EU LFGB food inspection product certification Product use Liquid silicone coating to dispensing type trademark clothing made of silica can be used alone trademark, but also for the cloth presser, press skins trademark [Products] clothing trademarks liquid silicone molding plus they belong liquid silicone, the amount of curing agent 10%, may be deployed to 1: 1, the curing agent is a platinum-catalyzed curable two-component liquid silicone rubber high strength, the base compound, crosslinking agent, catalyst, fillers and additives, these materials are free of heavy metals and aromatic solvents, the human body without toxic effects [clothing trademarks liquid silicone Features] 1, clothing trademarks liquid silicone has good mobility, high temperature resistance, corrosion resistance, and resistance to high tensile and tear strength , shrinkage, turning model number higher. 2, low shrinkage, the crosslinking process does not release low molecular weight, so the volume change, shrinkage of less than 0.1% 3, from product thickness limited, depth curing 4, this product has excellent heat resistance, temperature can reach 120-500 degrees 5, food grade, non-toxic, tasteless, food-grade certification by FDA and ROHS detection 6, good fluidity, easy to perfusion; can also be heat cured at room temperature curing, easy to operate Usage and Precautions 1 the A, B two components by weight of 1: 1 mixing, by vacuum degassing to watering. At room temperature (28 degrees) 30 minutes operating time, 4-5 hours to fully cure; heating 60-120 degrees, it can be completely cured in a few very minute. 2, liquid silicone trademark clothing when operating to and used separately from the container condensation silicone, use unused tools operate at room temperature silica gel silicone. ? Parameters Appearance: Translucent A, group B composition ratio of 10: 1 Viscosity (ten thousand CPS):? 6 ~ 8 hardness (JIS A):?? 35 ± 1 Tear strength (KN / m): 17 ± 2 Tensile strength (Mpa):? 6.6 ± 0.5 Elongation at break (%):? 300 to 350 NOTE: clothing trademarks liquid silicone hardness, color, full curing time can be adjusted according to customer requirements. Packaging and storage Packing: A / B Series Standard Package 1 kg / 5 kg / 20 kg / 25 kg / 200 kg / drum Shelf Life: 12 months [Storage] 1, and molding products are non-dangerous goods? , sealed and stored in a cool place, to prevent rain, sunlight exposure. 2, clothing trademarks and molding liquid silicone products in use should be prohibited mixed with an organic tin compound condensation silicone rubber, otherwise, the rubber does not cure, prevent parathion mixed with nitrogen-containing compounds, otherwise it will not cure this product incomplete or vulcanization.