Silicone thermal transfer trademark

First, the material 1, silicone, curing agent, Segao 2, silicone thermal transfer coating of glue 3, 4 hot-melt adhesives, silicone release transfer film Second, steps 1, silica gel according to 10: 1 deployment of a good press 8-10% added to creams, mix thoroughly, printed on the transfer film after printing once, Kaozhi table dry, until the desired effect and the thickness, color, etc., caused by dry final baking. 2, thermal transfer coating silicone glue 1: 1 deployment even printed on the silica surface, print again, with a 120-degree dry roast to the table. India finished second time after the heat capacity of the direct printing or hot melt adhesive powder, and finally the oven 120 degrees 30 minutes to transfer. (Heat transfer temperature of 140 degrees 12 seconds).