Silicone screen printing

Silk screen printing silicone is passed through a screen printing plus a silicone 温后成 type. Silk screen printing can be printed chromatography on silica gel, light matte, rounded rectangular, thin slabs thermal silica. For textiles, non-woven fabrics, clothing, gloves, printed pattern, leather leather surface printing and so on. Good adhesion, high strength, feel soft and delicate, three-dimensional sense of strong, beautiful decorative effect, high performance, non-toxic and so on. Printing silicone are extremely versatile, silk screen silica gel with a strong three-dimensional pattern, with soft, with textile or leather complement each other, silk screen design also has excellent peel strength, abrasion resistance, brightness; also has a waterproof, non-slip, breathable , high temperature resistance and good leveling. Medium viscosity, high temperature fast curing, high transparency, good adhesion, heat, water, good air permeability. Silk screen silica as a two-component silicone. Two-component does not depend on moisture in the air, but by the catalyst (platinum) at a certain temperature molding. Temperatures around 80-150 degrees. Screen requirements: use mesh is generally determined based on printing graphics, such as line thickness, thickness printed, usually between 80-150 mesh, printing thickness between 0.1-2mm, hand-printed is repeated complete, so stencil thickness is thin, usually forming a printing machine, and therefore relatively thick stencil thickness. Instructions for use: A, B groups were (weight ratio) of 10: 1 mix thoroughly, and vacuum discharge bulbs. Tuned to silica gel for screen printing on the use of materials. Now with the current, so as not to waste plastic materials, this compound can also be formulated into a variety of pigment, mixing evenly, it can be used after vacuum degassing. Packaging The product is packaged in 20kg / drum packaging, storage at room temperature for six months, the process of using an organic tin catalyst water, impurities, condensation silicone rubber, acids, alkalis and other sulfur, phosphorus, nitrogen and organic matter that may affect the glue curing, these impurities can not be mixed use.