Wholesale Silicone? Select hung wind silica

[Certification] This product complies with ROHS and other environmental requirements by the US FDA and the EU LFGB food inspection product certification [Products] food-grade liquid silicone is addition silicone material, suitable for two-component injection molding process, high transparency, high strength, high resistance to tear liquid silicone rubber. Two-component is composed of two components A agent and B agent composed of a flowing liquid, no matter what color, in fact, are the same quality can be cured at room temperature can also be heat cured. Product use this product for high-grade cast molding products, cake mold, sugar art mold, chocolate mold, candy mold, cake model, etc. [Features] 1, has good mobility, high temperature resistance, corrosion resistance, and high tensile and tear strength, low shrinkage, higher number of turning model. 2, low shrinkage, the crosslinking process does not release low molecular weight, so the volume change, shrinkage of less than 0.1% 3, from product thickness limited, depth cured for 4, with excellent high temperature resistance, temperature can reach 120- 500 degrees 5, food grade, non-toxic, tasteless, food-grade certification by the FDA and ROHS detection 6, good fluidity, easy to perfusion; can also be heat cured at room temperature curing, easy to operate Usage and Precautions 1, A, B two components by weight of 1: 1 mixing, by vacuum degassing to watering. At room temperature (28 degrees) 30 minutes operating time, 4-5 hours to fully cure; heating 60-120 degrees, it can be completely cured in a few very minute. 2, the operation should be condensed and used separate silicone container, use unused tools operate at room temperature silica gel silicone. Note: viscosity, operation time, after curing hardness and color can be adjusted with the customer needs. Parameters item food-grade liquid silicone HF-7609 Appearance Translucent (color optional) Viscosity Pa.S 2000 Density g / cm3 1.1 Hardness A ° 12-35 (hardness optional) high temperature 120-500 degrees (temperature optional ) Elongation% Tear strength 450 KN / m 30 Curing Condition A / B Component 1: 1 by weight geometric After mixing, 150mm × 150mm × 2mm, 150 ℃ 7 分钟 molding. Note: The above product hardness, color, full curing time can be adjusted according to customer requirements. Packaging and storage Packing: A / B Series Standard Package 1 kg / 5 kg / 20 kg / 25 kg / 200 kg / drum Shelf Life: 12 months Storage: tightly closed. Store in a ventilated, cool, dry place, away Children place, away from direct sunlight, not classified as dangerous, according to non-dangerous goods