Yangjiang Yangjiang silk screen printing ink printing ink printing ink manufacturers purchase Yangjiang

Yangjiang Yangjiang silk screen printing ink printing ink printing ink manufacturers purchase Yangjiang Yangjiang Yangjiang silk screen printing ink screen printing ink screen printing ink manufacturers purchase Yangjiang Application: for all types of soft and hard PVC material Second, the composition: using advanced resin, special pigments and special additives and other refined three characteristics: 1, a good film overall performance, the deployment of various colors 2, good adhesion, high gloss The use of the environment: Closed dust, temperature 20 ~ 30 ℃, humidity <85 % applying best in five technical parameters [Appearance]: Various color viscous liquid viscosity []: 35000 + 5000mpa.s / 25 ℃ [gravity]: 0.95 + 0.02KG / L / 25 ℃ [resistance movement] : Do not migrate [bleeding resistance]: not bleed [shiny]: 70 + 10% [adhesion]: 100% [thinner]: in the dry water SS pad thinner [ratio]: 100: 20 ~ 40 【Shelf life: 1 year at room temperature sealed [Painting method: silk screen printing transfer six, the construction process 1 l printing, the substrate treatment: removal of white oil on material oil, in order to avoid the emergence of oil printing, adhesion poor error 2, dilute: the SS dry ink and water to 100: mixing ratio of 20 to 40 and stir 3, Printing: Printing drying after 24 hours 4. Packing: until the ink is completely dry, no abnormal test After the transfer before packaging and shipment l 1, the substrate treatment: removal of white oil on material oil, in order to avoid the emergence printing oil, poor adhesion anomaly 2, dilute: the SS dry ink and water to 100: 20 ~ 40 mixing ratio and stir 3, printing: a, in the corresponding transfer paper printing support from the type b, since dry 10 minutes after the printing ink c, since dry 10 to 20 minutes after printing plus powder hot melt 4, Transfer: After transferring ink has dried completely transferred, heating 130 ~ 150 ℃, when the length of 3 to 5 seconds 5, packing: to be the ink is completely dry, no abnormal test only after the printing and packaging and shipment l 1, bottom timber treatment: removal of white oil on material oil, in order to avoid the emergence of oil printing, poor adhesion anomaly 2, dilute: the SS SS printing ink and thinner to 100: mixing ratio of 20 to 40 and stir 3, printing: a, with a solvent to clean utensils after pad printing b, since dry 24 hours after printing 4. Packaging: until the ink is completely dry before packaging and shipment of seven tests without exception, the storage method, put in ventilation , dry place 2, put on couch board, stacked not more than 4 barrel 3 can not be reversed, fire, lighter, electronic communications equipment can not be brought into the storage area 4, a detailed safety instructions refer to "Material Safety Data Sheet "Eight Notes: 1. Stir before using the ink 2, humidity greater than 85% or rainy days during the construction, please add a small amount of 3 783 special slow dry, is coated on the surface grease, dust must be cleaned, moisture drying 4, to avoid different products mix, so as not to affect the adhesion and physical properties of 5, material changes, you must first be tested in order to avoid poor adhesion, migration, and abnormal bleeding. 6, when the ink to dilute the paint according to your company Mode Select the appropriate open water, avoid Cypriot stencils, drawing and other anomalies 7, openings must be tightly closed after use to avoid moisture or dried 8, using the process discovered the existence of any unusual or have any questions, please contact our sales or research and development