Hubei Xiaogan melt pressure transducer PT131 mountain like

PT131 Series temperature / pressure (integrated) Melt sensor (Xiaogan mountain like electrons) hose isolated structure, improve the wear resistance and acid resistance of the sensor, thus extending the life of the sensor. Suitable for measuring 100 ℃ ~ 400 ℃ rubber, plastics, chemical fiber, polyester, steam and other media pressure measurement and control are widely used: rubber, plastic, chemical fiber polyester nylon, polyester, steam boilers, asphalt, paint, high temperature Melt pressure measurement and control products Features: 1: sensor diaphragm 2: wear resistance and acid resistance 3: resistance strain gauge pressure sensing chip 4: flat diaphragm design, dedicated to the melt pressure measuring 5: With zero, span compensation, temperature compensation 6: high accuracy, high stability of the amplification circuit 7: Straight resistant to temperature 200 ℃, the hose can withstand a temperature of 450 ℃ 8: Range 0 ~ 1 ~ 200MPa any option 9: full seal welded structure, impact resistance, fatigue resistance, high reliability 10: secondary instrument can be equipped with live shows, the main technical parameters indicators PLC control range: 0 ~ 1 ~ 200 (MPa) Overall accuracy: 0.2% FS, 0.5% FS, 1.0% FS output signal: 2.0mV / V, 2.5mV / V, 3.33mV / V, 4 ~ 20mA, 0 ~ 5V, 1 ~ 5V, 0 ~ 10V supply voltage: Sensor: 10V (6 ~ 12V) / Transmitter: 24V (9 ~ 36V) Note: The transmitter output is 0 ~ 10V, the power supply voltage of 15 ~ 36V medium temperature: 0 ~ 200 ℃ ~ 400 ℃ ambient temperature: room temperature insulation resistance: more than 2000MΩ (100VDC) Load Resistance: Current Output: maximum 800Ω; voltage output: more than 50KΩ sealing rating: IP65 Long-term stability of 0.1% FS / Year Vibration: the mechanical vibration frequency 20Hz ~ within 1000Hz, the output changes less than 0.1% FS signal leads Interface: five-pin connectors or gold-plated six-pin connector Connecting thread: 1 / 2-20UNF, M14 × 1.5, M20 × 1.5, M22 × 1.5, etc., other threads can be designed based on customer requirements