WQ-COND conductivity sensor price WQ-COND Conductivity Sensor

WQ-COND conductivity sensor conductivity sensor and recorder for measuring the conductivity of water conductivity sensor WQ-COND Description: WQ-Cond Conductivity sensor uses four electrodes measurement technology, offers a large range of conductivity and temperature accurate readings. Since the ion conductivity of the solution increases with temperature, and therefore built-in temperature sensor, and the relative standard 25oC, provide 2% / oC automatic temperature compensation. Built-in interface module digital conductivity and temperature data into 2 shares of independent 4-20mA signals are connected to the data logger and a programmable logic controller (PLC) device. WQ-COND Conductivity Sensor Features: 0.5% of reading accuracy conductivity and temperature measuring 4-20mA signal dual output range is 0-20 Siemens / cm rugged housing for harsh environment to be measured at a depth of 30 meters Conductivity Probe Fully encapsulated WQ-COND conductivity sensor technology parameters: Measuring range 0-200us / cm, 200-2000us / cm, 2-20ms / cm, 20-200ms / cm, 200-2000ms / cm resolution 0.1 us / cm, 1us /cm,0.01ms/cm,0.1ms/cm,1ms/cm (corresponding to the measuring range) Accuracy ± 0.5% of reading the temperature of -5 to + 0.01 ℃ at 70 ℃ Resolution 0.2 ℃ temperature accuracy of the temperature compensation Automatic ( 2% / ℃, with respect to the standard value of 25 ℃) temperature response ≤20 seconds Dual 4-20mA output signal (conductivity and temperature sensor) Maximum Pressure 35psi (25 meters deep) minimum immersion depth 36mm Operating Voltage 10-36VDC output current of 20mA + 12 seconds working temperature sensor output current two warm-up time -5 ~ + 70 ℃ Storage Temperature -20 ~ + 100 ℃ Size 22mm × 202mm (diameter × length) Weight 227g (including cable) Standard configuration Model Configuration WQ-Cond-1 conductivity sensor, measuring range: 0-200us, 7.6m cable, user manual WQ-Cond-2 conductivity sensors, measuring range: 200-2000us, 7.6m cable, user manual WQ-Cond-3 conductivity sensor, the measuring range : 2-20ms, 7.6m cable, user manual WQ-Cond-4 conductivity sensor, measuring range: 20-200ms, 7.6m cable, user manual WQ-Cond-5 conductivity sensor, measuring range: 200-2000ms, 7.6 m cable, user manual Optional Accessories Type Description WQEXC extension cable, up to 152M DDO505 conductivity sensor protective plastic shell DDO510 conductivity sensor stainless steel protective shell