Norit membrane technology parameters

Film Material: polyether sulfone (PES) membrane shell material: UPCV cover Material: ABS fiber support network: Epoxy protection solution: 0.5% aqueous solution of formaldehyde design through volume: 50 ~ 120l / m2.hr design pressure: 0.5 ~ 1.0bar Backwash frequency: once every 20 ~ 60min Backwash time: 30 to 60 seconds / backwash flow rate: 2 to 3 times the water flow (or 150 ~ 200l / m2.hr) chemical cleaning frequency: every 1 to 3 month operating conditions prefilter: no less than 100μm filtering accuracy using PH range: 2 to 13 highest tolerated temperature: 45 ℃ maximum water pressure: 3.0bar maximum capacity resistant to chlorine: 200ppm Maximum Backwash Pressure: 3.5bar operation : within the recommended pressure ultrafiltration membrane composition: Norit Components outlet pipe from PVC outer cylinder and center, and a hollow fiber membrane filaments. UF features: 8-inch standard design membrane module interchangeability requirements facilitate the procurement of low construction site run out of water under the same conditions of convenience, small membrane area required for membrane cleaning low cost high resistance to chemical corrosion intelligent system ensures convenient stability Run online testing system to ensure reliable operation UF Sale: 5-year warranty and lifetime maintenance