Kunming, Dali softening desalination equipment softened water equipment softener equipment Lincang Red softener equipment

Workflow work (sometimes called a water production, the same below), backwash, absorption of salt (regeneration), slow rinse (replacement), five quick rinse process. All the different processes are very close to the water softening equipment, but because of the different needs of the actual process or control, there may be some additional processes. Any sodium ion exchange based water softening devices are developed based on this process to five (where automatic water softening equipment will increase the brine re-injection process). Backwash: the device to work after a period of time, will block a lot of raw water to bring the dirt in the upper part of the resin, after the removal of these contaminants, the ion exchange resin to fully expose the regeneration of the effect can be guaranteed. Backwash process is the water washed into the bottom of the resin, the outflow from the top, so you can put the top block down the dirt away. This process usually takes about 5-15 minutes. Absorption of salt (renewable): Coming resin tank brine injection process, the traditional equipment is the use of salt brine pump, automatic equipment is built by private jet to saline inhalation (as long as there is some pressure to the water) . In actual operation, the brine flows at a slower pace than simply resin regeneration with brine resin is good, so is the use of saline water softening equipment slow flow through the resin regeneration, a process that normally takes 30 minutes of actual time is good enough salt. Slow rinse (replacement): After the salt water through the resin, the raw water with the same flow rate of the resin in the salt slowly rinse the whole process is called slow rinse, as this flushing process there are still a large number of functional groups calcium and magnesium ions are sodium ion exchange, based on actual experience, the process is the main process of regeneration, so many people will this process is called substitution. This process is generally the same time with the absorption of salt, which is 30 minutes. Fast Flush: In order to thoroughly rinse the salt residue, to be used with a flow rate close to the actual work, the resin is washed with raw water, final effluent of this process should be the standard soft water. Under normal circumstances, quick rinse process is 5-15 minutes. Applications can be widely used to soften steam boilers, hot water boilers, switches, evaporative condensers, air conditioning, direct gas turbine systems, water supply. It can also be used in hotels, restaurants, office buildings, apartments, homes and other domestic water treatment and food, beverage, wine, laundry, printing and dyeing, chemical, pharmaceutical and other industries softened water equipment