From 0.5 to 100 tons ultrafiltration equipment manufacturers highly pure heat supply

Guangzhou Environmental Protection Technology Co., Ltd. Tianshui to provide you with a wealth of information and information on the? City ultrafiltration plant and so on. Ultrafiltration membrane is a pressure-driven membrane separation process, through the porous membrane surface can be screened in diameter between the particles and impurities trapped 0.002-0.1μm can effectively remove colloid, silicon, proteins, micro-organisms and organic molecules. Features ultrafiltration device: ultrafiltration device using a vertical cross-flow filtration methods, which can effectively clean or backwash. Therefore, it has the other purification separation means significantly different performance: 1, high precision: completely filter out bacteria in water, rust, colloid, macromolecular organic matter and other substances, to retain trace elements beneficial to human health, clean water, micro-organisms and turbidity and other key indicators is better than bottled drinking water health standards. 2, long life: the ultrafiltration unit vertical cross filtration principle, self-cleaning, easy to fouling, so in normal use filter life of 30 to 50 times the normal water purifier. 3, large flux: You can also meet to drink straight, beauty, bath, food, sanitation and other needs. 4, low cost: As ultrafiltration unit flux, long life, maintenance-free, and therefore the cost per ton of water purification is only about a dollar, far lower than other purification devices. The ultrafiltration device technical performance parameters: 1, ultrafiltration membrane with a PVC alloy membrane, has the following advantages: 1, the film material is a modified PVC resistant to pollution, hydrophilic. 3, flux lasting stability, strong anti-pollution. 4, can withstand short-term 200ppm chlorine environment for the pH range of 2-13. 5, completely sterile, producing water turbidity is less than 0.1NTU. 6, a cross-flow design, eliminate fouling, increased life expectancy. 7, the product water SDI15 <1 (measured value is less than the raw water turbidity when 20NTU) 8, molecular weight cutoff: 1000 to 1,000,009, the working temperature: ≤45 ℃ 10, working pressure: ≤0.5Mpa 11, the feed liquid recovery : 80%