Good product deflection detector trust in Bo Feng Gang gives you faith to do for you

Contact: Feng Gang Tel: 0317-8319626 Mobile: 15133799602 Work QQ: 545837729 deflection tester uses: mainly used to detect shaft, disc-type radial another member, runout and face runout, product design, beautiful, can also be used to detect shaft, disc-type radial another member, runout and face runout, high precision operation is extremely convenient. Deflection tester using the rules: 1) part inspection should be preceded by L = 400MM test rods and dial indicator for yaw precision instrument calibration, to ensure that qualified only after the use. 2). Deflection tester is sophisticated detection equipment, the operator must be familiar with the instrument skills, carefully maintenance, and designate a person to use. 3). Deflection tester equipment must be kept in good condition, equipment installation should be balanced and reliable rail surface should be smooth, no bump scars, two top concentricity and tolerance should be a to b to less than 0.02 in the range L = 400MM MM. One. When the workpiece is detected, should be handled with care, guide surfaces are not allowed to place any tool or workpiece. II. You should designate a person at each end of the deflection device performed precision measurement and inspection to ensure equipment availability, and make actual records. III. After the completion of the workpiece is detected, the instrument immediately maintenance, rail and top cover should be oiled rust and keep the surrounding environment clean. Partial-place check packaging: wooden (also can be customized according to user requirements) deflection tester colors: deflection tester is generally used in green and blue (also according to user requirements) deflection device main technical parameters: 1, No. 2 Morse top 60 ° cone face Morse taper radial runout ≤0.005mm 2, the top axis in the range of 100mm to parallel (horizontally and vertically) rail ≤0.006mm 3, the part is the maximum diameter of 270mm -560mm 4, measure the length of 300mm, 500mm, 1000mm, 1500mm, 2000mm this document comes from: http: //rtjxwx.blog.163.com/