Partial-place check to use, the main purpose and equipped with equipment

Partial-place check, also known as deflection detector, innovative product design, simple structure, beautiful, and easy deflection tester operation, high accuracy, high measurement efficiency. Deflection tester for measuring shaft, plate products and parts radial, ovality, end precision error, deflection tester (deflection detector) utilizing two top positioning shaft parts, the part is rotated radial probe measurements directly on the part to be measured in the radial direction part of runout. The main technical parameters No. 2 Morse top 60 ° cone face Morse taper radial runout ≤0.005mm; top axis in the range of 100mm to parallel (horizontally and vertically) rail ≤0.006mm; the part is The maximum diameter of 450mm; measuring the length of 300mm, 500mm, 1000mm, 1500mm, 2000mm 3000mm. Radial rotary precision: 0.003mm side rails on the audience of the two parallel connection ≤0.07mm equipped with top equipment: Indicators: Spring table, micrometer, dial indicator to use: Tighten the eccentric shaft, first fixed top seat in the instrument holder fixed, according to the measured length of the part of activities leading fixed in place, pressing ball handle, into parts, told the center hole with two top parts. Fasten the handle of the top fixed. The activity table seat in the desired position, with the dial indicator (micrometer) can be carried out testing. More Related Products: High deflection device | geometric error measurement instrument | granite deflection tester more related products please visit: http: //www.huayuliangyi.com/