3590S adjustable potentiometer rotary potentiometer Shu Shu adjustable glass glaze potentiometer 3590S-2 ..

Potentiometer is mainly used to detect high-frequency power supply communication power supply module industrial equipment, numerical control equipment electrical equipment sensors electricity sensor transmitter broadcast audio oscillator welding these set-top box industry suppliers specializing in the supply of quality Bones wirewound multi-turn potentiometer Conductive plastic potentiometers multi-turn potentiometer 1k 2k linear multi-turn potentiometer 10k multi-turn potentiometers multi-turn potentiometer Slide Potentiometers Slide Potentiometers b10k 100k double potentiometer Potentiometer 3590S technical parameters of the electrical characteristics (Electrical Characteristics) standard resistance range (Standard Resistance Range) ......... 200 to 100K ohms resistance tolerance (Resistance Tolerance) ................ ± 5% Independent Linearity ( Independent Linearity) ............... ± 0.25% effective rotational angle (Effective Electrical Angle) ...... 3600 ° +10 °, -0 ° minimum resistance (Absolute Minimum Resistance) ........ 1 ohm or 0.1% maximum (whichever is greater) Noise (Noise) ......................... .100 ohms ENR maximum withstand voltage (Dielectric Withstanding Voltage) (MIL-STD-202, Method 301) sea level (Sea Level) ...................... ......... 1,500 VAC minimum rated power (Power Rating) (Voltage Limited By Power Dissipation or 450 VAC, Whichever is Less) +40 ° C ........... 2 watts + 125 ° C .... 0 watt Insulation Resistance (Insulation Resistance) (500 VDC) ...... 1,000 megohms minimum resolution (Resolution) .............. See recommended part numbers environmental characteristics (Environmental Characteristics) Operating temperature range (Operating Temperature Range) ...... + 1 ° C to +125 ° C Storage temperature range (Storage Temperature Range) .......- 55 ° C to +125 ° C temperature coefficient range (Temperature Coefficient Over Storage Temperature Range2) .... ± 50 ppm / ° C maximum / unit shock (Vibration) .................. ...... 15 G brush return (Wiper Bounce) ...... 0.1 millisecond maximum impact (Shock) ...................... .50 G high-temperature load life (Load Life) .................. 1,000 hours, 2 watts total resistance change (Total Resistance Shift) ......... ............ ± 2% maximum rotational life (Rotational Life) (No Load) ....... 1,000,000 shaft revolutions Total Resistance change (Total Resistance Shift) ...... .............. ± 5% maximum moisture (Moisture Resistance) (MIL-STD-202, Method 103, Condition B) total resistance change (Total Resistance Shift) ..... ................................ ± 2% maximum degree of protection (IP Rating) sealed objects (Sealed Versions) (- 3, -4, -7, and -8) ............................ IP 65 is not sealed objects (Unsealed Versions) ( -1 -2, -5, and -6) ............................ IP 40 mechanical properties (Mechanical Characteristics) terminal stop gear strength (Stop Strength) .......... 45 N-cm (64 oz.-in.) minimum mechanical angle (Mechanical Angle) ............... ... 3600 ° +10 °, -0 ° torque (Torque) (Starting & Running) ....... 0.35 N-cm (0.5 oz.-in.) maximum (unsealed) 1.1 N-cm (1.5 oz.-in.) maximum (sealed) fixation (Mounting) ............ 55-80 N-cm (5-7 lb.-in.) (plastic) 90-113 N -cm (8-10 in.-lb.) (metal) shaft runout (Shaft Runout) .................. 0.13 mm (0.005 in.) TIR lateral oscillation (Lateral Runout) ................. 0.20 mm (0.008