C2H4O gas detection module

C2H4O ethylene oxide gas detection module is an electrochemical gas transmission module designed specifically for OEM customers products, this module using imported electrochemical gas sensors, after calibration adjustable, can be used to measure dozens of gas , including such as: O2, CO, H2S, CL2, SO2, O3, to meet the user for a low-cost, embedded OEM design requirements, greatly facilitates the users. Module Features: 1: After power can be automatically shorted reference electrode and working electrode, the protection of life of the sensor. 2: Two-wire fool wiring, wiring personnel without regard to the power of positive and negative, reverse the can work. 3: reliable module performance with overvoltage and overcurrent protection. C2H4O module oxide (ethylene oxide) sensor module C2H4O module oxide (ethylene oxide) sensor module Technical Data Sensor: electrochemical measurement range: 0-100ppm, 0-200ppm, 0-1000ppm resolution?: . 0. 01ppm, 0 1ppm Response time: ≤30 seconds Operating modes: continuous working voltage: DC12 ~ 36V (typically set according to DC24V) Output Current: 4-20mA (can also be directly output relay switch) Output: 4 ~ 20mA, 40 ~ 200mV, RS485 temperature range: -20 ℃ ~ 50 ℃ Humidity range: 0 ~ 95% (RH) non-condensing Dimensions: 44 × 44mm C2H4O module oxide (ethylene oxide) Sensor Module Features : 1: After power can be automatically shorted reference electrode and working electrode, the protection of life of the sensor. 2: Two-wire fool wiring, wiring personnel without regard to the power of positive and negative, reverse the can work. 3: reliable module performance with overvoltage and overcurrent protection.