Thermometer adapters

Thermometer adapter 1: thermometer adapter for GB / T261-2008 latest national standards, mainly by the adapter (brass), clamping nut (stainless steel), two different size washers (soft aluminum), the sleeve (stainless steel) of five parts in full compliance with GB / T261-2008 flash point tester Pensky - Martens closed cup method, ISO 2719: 2002 standards. 2: (1) supporting the use of thermometers: Low range -5 ~ 110 ℃, in the range of 20 ~ 150 ℃, high-range 90 ~ 370 ℃. Three kinds of the latest standard thermometer. (2) for the flash point of Standard Oil in line with GB / T261-2008 Flash Point Tester Pensky - Martens closed cup method. Standard Oil dedicated flash point: 53 ℃ dedicated flash point standard oil, 68 ℃ dedicated flash point standard oil, 84 ℃ dedicated flash point standard oil, 109 ℃ dedicated flash point standard oil, 134 ℃ dedicated flash point of Standard Oil. Five different flash point temperature calibration standard special oil. (3) Test gauge: a test dose expansion part test thermometer gauge, length and temperature from the bottom of the thermometer bulb expansion rod section must be measured by the test gauge. (4) also provides a variety of Flash Point Tester of renovation. Provincetown Emperor Control the pace of keeping up with the standard, the introduction of GB / T261-2008 new standard facilities. GB / T261-2008 thermometer adapter size requirements GB / T261-2008 thermometer adapter Provincetown Imperial China Analysis Instruments Division